The Remington 1100 is a legendary semi-automatic shotgun, prized for its reliability and performance. Proper disassembly is crucial for cleaning, maintenance, and safe storage. This guide provides a step-by-step walkthrough, ensuring you can confidently disassemble and reassemble your Remington 1100. Always prioritize safety: Ensure the firearm is unloaded and pointed in a safe direction before beginning any disassembly.
Step-by-Step Disassembly of a Remington 1100
Before we start, let's gather the necessary tools: a screwdriver (usually a standard Phillips head), a cleaning rod, and a cleaning patch. You might also want a gun cleaning kit and appropriate lubricant.
1. Unload the Firearm: This is the most critical step. Visually inspect the chamber and magazine tube to confirm they are completely empty. Cycle the action several times to double-check.
2. Remove the Bolt:
- Retract the bolt: Pull the charging handle all the way to the rear.
- Rotate the bolt handle: Many find it easier to rotate the bolt handle 90 degrees upward. This allows for easier removal.
- Remove the bolt: The bolt should now slide out of the receiver. Set it aside in a safe place.
3. Remove the Trigger Group:
- Locate the trigger group retaining pin: This pin is usually located on the bottom of the receiver, near the trigger guard.
- Remove the retaining pin: Use a punch or similar tool to carefully drive out the retaining pin. You may need to use a small hammer.
- Remove the trigger group: With the retaining pin removed, the trigger group will slide out of the receiver. Again, set it aside carefully.
4. Separate the Receiver and Barrel:
- Locate the barrel extension nut: This nut is located at the end of the barrel, where it meets the receiver.
- Unscrew the barrel extension nut: Use a wrench (often included with the gun or readily available) to carefully loosen and remove the nut. This will often require a bit of effort; don't force it.
- Separate the barrel: Once the nut is removed, the barrel should slide off the receiver.
5. Disassembly Complete: You've now successfully disassembled your Remington 1100! You can now proceed with cleaning and lubrication. Remember to meticulously clean all components, paying special attention to the bolt and barrel.
Reassembly: A Mirror Image of Disassembly
Reassembly is the reverse process of disassembly. Carefully insert each component, ensuring proper alignment. Refer back to the steps above for guidance, but work slowly and deliberately. If you struggle, look for online videos showing the process for visual aid.
Important Considerations and Safety Precautions
- Consult Your Owner's Manual: The Remington 1100 owner's manual is the ultimate guide. Always refer to it for specific instructions.
- Safety First: Never point the firearm at anything you are not willing to destroy. Keep the gun unloaded and pointed in a safe direction during the entire process.
- Proper Lubrication: Use a high-quality gun lubricant on all moving parts to ensure smooth operation and prevent wear.
- Professional Help: If you feel uncomfortable with any part of this process, seek assistance from a qualified gunsmith.
This guide provides a general overview. The specific steps might vary slightly depending on your model's year of manufacture. Always prioritize safety and consult your owner's manual for detailed, model-specific instructions. Proper maintenance will ensure the longevity and reliability of your Remington 1100.
